NOTE ON USE
•Allow for sufficient heat dispersion when installed on a rack.
•Handle the power cord carefully.
•Hold the plug when unplugging the cord.
•Keep the set free from moisture, water, and dust.
•Unplug the power cord when not using the set for long periods of time.
•Do not obstruct the ventilation holes. (For sets with ventilation holes.)
•Do not let foreign objects in the set.
•Do not let insecticides, benzene, and thinner come in contact with the set.
•Never disassemble or modify the set in any way.
FUNCTIONS
1)EJECT: Opens the CD door
2)STOP: Stops the CD.
3)SKIP: Skips through the tracks on the CD, forward or back.
4)
: Scans forward or back through the current track. This unit features 3 scan speeds. Keep
the 
or 
button pressed for a few seconds to change the scan speed.
5)PLAY/PAUSE: Plays or pauses the CD. Autocue func- tion sets the cue point automatically when this button is used.
6)CUE: Used to recall and preview the cue point.
7)TIME: LCD display reads the time remaining or time elapsed, according to this button.
8)PITCH: Turns pitch fader ON and OFF.
9)PITCH SELECT: Pressing the PITCH and PITCH BEND - (minus) buttons simultaneously changes the pitch fader range between +/- 8, 12, and 16%.
10)PITCH BEND: Maximum pitch on this unit is 16%. If the pitch fader is already physically set to 16%, this function will not work.
11)SGL/CTN : Switches between Single or Continuous play modes.
12)LOOP: Press once to set starting loop point, press again set ending point and enter loop. Press a third time to exit loop.
13)LCD DISPLAY: Shows time (minutes, seconds, frame), and pitch information.
14)PITCH FADER: Used to speed up or slow down cur- rent track.
15)AUDIO OUT: This stereo line output connects to the line input on any DJ mixer.
16)DIGITAL OUTPUT: This coaxial (S/P DIF) digital out- put connects to any RCA S/P DIF input, as found on most standard computer sound cards or CD burners.
17)FADER START: Connects to any DJ mixer equipped with a fader start input. This enables the user to start the CD from the cue point, using the mixer’s cross or line fader, depending on the mixer.
18)VOLTAGE SELECTOR: Used to select the unit’s volt-
age according to the local setting. Note: The voltage should preset correctly from the factory, however, make sure to check it before powering the unit.
*Just for Dual Voltage model only.
19)AC IN: This is the connection for the supplied power cable.
20)POWER: This button is used to power the unit ON and OFF.
21) PHONES: Use this stereo jack to connect a pair of headphones.
2
