1. Gain control: Controls the input sensitivity of each channel.
2
. Input selector switches: Selects phono or line inputs.
3. Master level control: Controls the overall signal output level.
4. Mic gain control: Controls the overall microphone output level.
5. Channel fader: Controls the input channel level.
6. Crossfader Reverse LED: Bi-color LED indicates the status of the crossfader reverse
function. When LED is green, the crossfader is normal. When LED is red, the crossfad-
er direction is reversed.
7. Crossfader: Fades the master output between channels 1 and 2.
8. Power switch: Selects power "ON" or "OFF".
9. Cue pan: Fades the headphone output between channels 1 and 2, effectively allowing
the user to preview a mix.
10. Headphone level control: Controls the overall headphone output level. It is recom-
mended headphones with an impedance rating of 200 ohms or less be used for maxi-
mum volume.
11. Input Level Meter: Monitors each channel’s input level.
12. Microphone input: 1/4” connector
13. Crossfader Curve adjustment: Adjusts the shape of the crossfader curve from a quick
cut for scratching and cutting to a longer fade for mixing.
14. Crossfader Reverse: Reverses the direction of the crossfader. Bi-color LED indicates
the status of the crossfader reverse function. When LED is green, the crossfader is
normal. When LED is red, the crossfader direction is reversed.
15. Headphone Mute: Mutes the headphone signal output
16.Headphone output: Connection for 1/4 inch headphone. Recommended headphone
impedance is 32-200 ohms for maximum volume.
17. Power supply connector: Input connection for the accompanying power supply.
18. Master output: TRS balanced (1/4”).
19. Master output: unbalanced RCA connector
20. REC output: record output connects directly to recording source (tape deck, CD...)
21/22. Channel inputs: Line and phono signal inputs. L
ine inputs are used to connect
to line level sources such as CD players, samplers, tape players, etc. Phono
inputs are used to connect to turntables.
23. Ground connector: Connects to the turntable ground connector to eliminate electri-
cal hum. Ground connectors usually supplied with turntables.
D E S C R I P TI ON O F FU N C TI O N S