PART NAMES & FUNCTIONS
20)PHONO/LINE SWITCH
Note: Key Lock and Digital output processing is only available when the LINE output is used.
21)DIGITAL OUT
Use this output to connect your T.80 to any SPDIF in equipped digital device.
22)POWER CORD CONNECTOR
Used to connect the included power cord.
23)POWER SWITCH
This switch turns the power on or off, including the motor and audio signal.
SPECIFICATIONS
APPLICATION:
This specification applies to the direct drive turntable unit T.80
STANDARD TEST CONDITION: |
|
Ambient Temperature | 20 +/- 2 degC |
Relative Humidity | 65% +/- 5% |
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
TURNTABLE SECTION: |
|
Type | |
Motor | 8pole, 3phase,brushless DC motor |
Speeds | 331/3 and 45rpm and 78rpm |
Wow and Flutter | Less than 0.15% WRMS (JIS WTD) with 331/3rpm |
Pitch Controls | +/- 8%, |
Starting Torque | More than 1.6kgf.cm |
Starting Time | Less than 1 sec. with 331/3 rpm |
Braking Time | Less than 1 sec. with 331/3 rpm |
Braking System | Electronic brake |
Time for Speed Change | Less than 1 sec. from 331/3 to 45 rpm. |
| Less than 1 sec. from 45 to 331/3 rpm. |
| Less than 1 sec. from 331/3 to 78 rpm |
Audio Output | Phono/Line output |
TONEARM SECTION: |
|
Type | Static balanced straight shaped tone arm with cardan’s suspension |
Effective Arm Length | 191mm |
Applicable Cartridge Weight | 6~10g |
AUDIO SECTION: |
|
Digital Output | |
Preamp Frequency Response | |
Preamp Distortion | Less than 0.03% at 1KHz |
Preamp Noise Floor | |
CARTRIDGE SECTION: |
|
Channel Separation | More than 15dB |
Channel Balance | Within 2.5dB at 1KHz |
Needle Pressure Range | 1.5~2g |