Ovens are constructed of stainless steel. Standard range of belt speeds, internal temperatures and voltage can be modified to
meet any requirements. Conveyor belt travels left to right but can be ordered right to left. Single and stacked ovens furnished with
2-1/2” adjustable legs, infrared radiant heaters with fused quartz sheathing and on/off heat switch for heat control are standard.
Product opening adjustable from 1-1/2” to 4”, motors are permanently lubricated and bearings are long lasting teflon. Units are
UL and CUL listed. Printed in the U.S.A.
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International, Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Model No. Product Opening Cooking Chamber *Production Capacities
Width Length (D)
314HX Adjustable from 1-1/2” to 4” 16” 21-1/2” 14-16 12”fresh dough pizzas per hour
(40.7cm) (54.6cm) 56-60 5” fresh dough pizzas per hour
318HX Adjustable from 1-1/2” to 4” 19-3/4” 21-1/2” 10-12 16” fresh dough pizzas per hour
(50.2cm) (54.6cm) 14-16 12” fresh dough pizzas per hour
90-110 5” fresh dough pizzas per hour
Model No. *HZ Phase Volts Amp Watts Heating Elements NEMA Cord
Above Below
314HX 60 1/3* 208 26.4/15.2 5400 4 5 6-30P 4’/ N/A
60 1/3* 240 22.9/13.2 5400 4 5 6-30P 4’/ N/A
50 3 380/220 8.7 5400 4 5 N/A
318HX 60 1/3* 208 29.8/17.2 6200 4 5 6-30P 4’/ N/A
60 1/3* 240 26.3/15.2 6200 4 5 6-30P 4’/ N/A
50 3* 380/220 9.9 6200 4 5 N/A
*CE certified, 3 phase, and phase control units shipped with terminal block connections
Model No. Dimensions Approximate Weight Shipping Carton
Width(A) Depth(B) Height(C) Shipping Installed Length Depth Height
314HX 60” 21-1/4” 16-1/8” 115 lbs. 86lbs. 47-1/2” 27” 26-3/4”
(152.4cm) (54 cm) ( 40 cm) (52 kg) (40kg) (120.7cm) (68.5 cm) (68 cm)
318HX 60” 24-7/8” 16-1/8” 130 lbs. 96lbs. 47-1/2” 27” 26-3/4”
(152.4cm) (63.2 cm) (40 cm) (59kg) (44kg) (120.7cm) (68.5cm) (68 cm)
Specifications
Performance Data
Electrical Data
Typical Specifications
A
B
HOLMAN PROVEYOR®CONVEYOR OVENS
Model 314HX and 318HX
*
S t a r Ma nu fa cturing I n t e r n at i o n a l, In c.16-1/2”
17-7/8”
C
D =
314HX 27”
318HX 30-5/8”
D
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.