Star Manufacturing 872TS, 860TS, 848TS, 836TS Ultra-Max Snap Action Gas Griddles, Specifications

Star Manufacturing International, Inc .

ULTRA-MAX®SNAP ACTION GAS GRIDDLES

Models 824TS, 836TS, 848TS, 860TS & 872TS

27 1/4 [69.2CM]

Specifications

		Dimensions
Model	(A)	(B)	(C)	(D)	No.				Plate	Approximate Weight
No.	Width	Depth	Height Leg Width		Controls	AMPS	BTU	Grid Area	Thickness	Installed	Shipping
	Inches	Inches	Inches	Inches
824TS	24"	32-3/8"	18"	21”	2.5	.5	60,000	573 sq. in.	1"	222 lbs.	300 lbs.
	(61 cm)	(82.2 cm)	(45.7 cm)	(53.34)				(3,697sq cm)	(2.54 cm)	(100.6 kg)	(135 kg)
836TS	36"	32-3/8"	18"	33”	3.5	.5	90,000	860 sq. in.	1"	333 lbs.	435 lbs.
	(91.4 cm)	(82.2 cm)	(45.7 cm)	(83.8)				(5,545 sq cm	(2.54 cm)	(150.9 kg)	(195.8 kg)
848TS	48"	32-3/8"	18"	45”	4.5	.5	120,000	1146 sq. in.	1"	444 lbs.	520 lbs.
	(121.9cm)	(82.2 cm)	(45.7 cm)	(114.3)				(7,394 sq cm)	(2.54 cm)	(201.2 kg) (234 kg)
860TS	60"	32-3/8"	18"	57”	5.5	.5	150,000	1433 sq. in.	1"	555 lbs.	656 lbs.
	(152.4 cm)	(82.2 cm)	(45.7 cm)	(144.78)				(9,242 sq cm)	(2.54 cm)	(251.5 kg) (295.2 kg)
872TS	72"	32-3/8"	18"	69”	6.5	.5	180,000	1719 sq. in.	1"	666 lbs.	785 lbs.
	(182.9 cm)	(82.2 cm)	(45.7 cm)	(175.3)				(11,091 sq cm)	(2.54 cm)	(301.8 kg)	(353.2 kg)

Typical Specifications

Gas griddles are constructed of stainless steel, valve knobs are protected by a stainless steel bull nose front. Griddle plate is a 1” (2.54 cm) thick highly polished steel plate with 5” (7.6 cm) high tapered wrap-around stainless steel splash guard. Unit has 3-1/2” (8.3 cm) wide front grease trough with grease chute and a 6 qt. (5.68 L) capacity stainless steel grease drawer. Models 860TS and 872TS house two each 6 quart grease drawers. Units are equipped with a 30,000 BTU aluminized steel burner for every 12” (30.5 cm) of width and are controlled by a snap action control valve (110V) with an automatic safety pilot and 3/4” N.P.T. male gas connection with a convertible pressure regulator. Griddles are supplied with 4” (10.2 cm) high stainless steel legs that have a 1-5/8” (4.5 cm) adjust- ment. Supplied with 6’ cord and NEMA 5-15 plug. Units are approved for installation within 6” (15.2 cm) of combustible surfaces and are UL Gas Fire listed for U.S. & Canada and UL Classified to NSF Standard 4 Sanitation. Printed in the U.S.A.

Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.

Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800

Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com