Star Manufacturing 836T, 872T, 848T Ultra-Max Throttling Thermostat Gas Griddles, Specifications

Star Manufacturing International, Inc .

ULTRA-MAX®THROTTLING THERMOSTAT

GAS GRIDDLES

Models 824T, 836T, 848T, 860T & 872T

Specifications

		Dimensions
Model	(A)	(B)	(C)	(D)	No.			Plate	Approximate Weight
No.	Width	Depth	Height Leg Width		Controls	BTU	Grid Area	Thickness	Installed	Shipping
	Inches	Inches	Inches	Inches
824T	24"	32-3/8"	18"	21”	2	60,000	573 sq. in.	1"	220 lbs.	246 lbs.
	(61 cm)	(82.2 cm)	(45.7 cm)	(53.34)			(3,697sq cm)	(2.54 cm)	(99.7 kg)	(111.5 kg)
836T	36"	32-3/8"	18"	33”	3	90,000	860 sq. in.	1"	330 lbs.	369 lbs.
	(91.4 cm)	(82.2 cm)	(45.7 cm)	(83.8)			(5,545 sq cm)	(2.54 cm)	(149.5 kg)	(167.2 kg)
848T	48"	32-3/8"	18"	45”	4	120,000	1146 sq. in.	1"	440 lbs.	492 lbs.
	(121.9cm)	(82.2 cm)	(45.7 cm)	(114.3)			(7,394 sq cm)	(2.54 cm)	(199.4 kg)	(222.9 kg)
860T	60"	32-3/8"	18"	57”	5	150,000	1433 sq. in.	1"	550 lbs.	615 lbs.
	(152.4 cm)	(82.2 cm)	(45.7 cm (144.78)				(9,242 sq cm)	(2.54 cm)	(249.2 kg)	(278.7 kg)
872T	72"	32-3/8"	18"	69”	6	180,000	1719 sq. in.	1"	660 lbs.	738 lbs.
	(182.9 cm)	(82.2 cm)	(45.7 cm)	(175.3)			(11,091 sq cm)	(2.54 cm)	(299.0 kg)	(334.4 kg)

Typical Specifications

Gas griddles are constructed of stainless steel, valve knobs are protected by a stainless steel bull nose front. Griddle plate is 1” (2.54 cm) thick highly polished steel plate with a 5” (12.7 cm) high tapered wrap-around stainless steel splash guard. Unit has a 3-1/2” (8.3 cm) wide front grease trough with with grease chute and a 6 qt. (5.68L) capacity stainless steel grease drawer.

Models 860T and 872T house two each 6 quart grease drawers. Units are equipped with a 30,000 BTU aluminized steel burner for every 12” (30.5 cm) of width and are controlled by a throttling control valve with standing pilot light, 3/4” N.P.T. male gas con- nection with convertible pressure regulator. Griddles are supplied with 4” (10.2 cm) high stainless steel legs that have a 1-5/8” (4.5cm) adjustment. Units are approved for installation within 6” (15.2 cm) of combustible surfaces and are UL Gas Fired Listed for U.S. and Canada and UL classified to NSF Standard 4 Sanitation. Printed in the U.S.A.

Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.

Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800

Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com