7.Intellijack - Headphone Jack Replacement
Intellijack Icon
*The IntelliJack self diagnostic headphone circuit detects when the headphone jack has failed or been damaged. When a faulty headphone jack is detected, a BLUE “headphone” icon appears on the keypad (see #4 above). It will remain on until a new jack is installed and the circuit is reset. To reset the faulty headphone jack circuit, insert a known good pair of headphones for 10 seconds.
HEADPHONE JACK SCREWS
1)UNSCREW THE JACK ASSEMBLY SCREWS, ALTERNATING LEFT AND RIGHT IN ORDER TO BACK THE ASSEMBLY OUT.
2)REMOVE JACK ASSEMBLY, TIPPING THE FRONT FORWARD SO THE ASSEMBLY WIRES CLEAR THE OPENING.
3)UNPLUGTHE OLD HEADPHONE JACK AND DISCARD. PLUG IN NEW HEADPHONE JACK TO WIRE HARNESS.
4)INSERT NEW HEADPHONE JACK ASSEMBLY, TIPPING IT FORWARD SO ASSEMBLY WIRES CLEAR THE OPENING.
5)ALIGN AND SCREW IN THE HEADPHONE JACK ASSEMBLY SCREWS.
6)RESET HEADPHONE JACK ICON BY INSERTING A
IMPORTANT: Faulty headphones can trigger the headphone jack icon. It is important to test the headphone jack prior to replacement. If the headphone jack is deemed OK , simply reset the faulty headphone jack (STEP 6).
October, 2012 (Version 7) | STAR TRAC PERSONAL VIEWING SCREEN OWNER’S GUIDE |
21
