StarTech.com PEXUSB3S2 manual Hardware Installation

Installation

WARNING! PCI Express cards, like all computer equipment, can be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching your PCI Express card. StarTech.com recommends that you wear an anti-static strap when installing any computer component. If an anti-static strap is unavailable, discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds. Also be careful to handle the PCI Express card by its edges and not the gold connectors.

Hardware Installation

1.Turn your computer off and any peripherals connected to the computer (i.e. printers, external hard drives, etc.). Unplug the power cable from the rear of the power supply on the back of the computer.

2.Remove the cover from the computer case. See documentation for your computer system for details.

3.Locate an open PCI Express slot and remove the metal cover plate on the rear of the computer case. Note that this card will work in PCI Express slots of additional lanes (i.e. x4, x8 or x16 slots).

NOTE: If installing the card into a small form factor/low profile system, replacing the pre-installed full profile bracket with the included low profile installation bracket may be necessary.

4.Insert the card into the open PCI Express slot and fasten the bracket to the rear of the case, per your computer’s documentation.

5.OPTIONAL: Connect an LP4 molex power connector from the computer’s power supply to the LP4 connector on the card. This is only required if using the ports with bus-powered USB devices (no external power adapter) or if experiencing connectivity issues.

6.Place the cover back onto the computer case.

7.Insert the power cable into the socket on the power supply and reconnect all other connectors removed in Step 1.

Instruction Manual

2