![](/images/new-backgrounds/1142664/1426649x1.webp)
Introduction
Packaging Contents
•1x USB 3.0 SATA 3.5in Hard Drive Enclosure
•1x Pack of Foam Spacers
•1x 3ft USB 3.0 Cable
•1x Universal Power Adapter
•3x Power Adapter Plug (NA/UK/EU)
•1x Instruction Manual
System Requirements
•Computer system with available USB 3.0 (5 Gbit/s) port or USB 2.0 port (480Mbps)
•3.5” SATA Hard Drive (HDD)
•Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7/8/8.1
Hardware Installation
WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an
1.Set the enclosure on a flat surface, with the cooling fan facing downwards.
2.On the top panel, remove the two small screws at the corners. Remove the top panel.
3.Located at the opposite end from the internal SATA connectors is a small plastic wedge. Flip the wedge up and out of the enclosure.
4.Place the 3.5” SATA hard drive into the enclosure and then slide it into the SATA connectors.
Instruction Manual
2