Instruction Manual
6
Once the drive has been secured within the Enclosure, connect the DC 7.
12V power adapter to the power adapter port. Connect the remaining
end of the power adapter to an available power outlet.
Connect the USB A-B cable to the USB B port on the rear panel of the 8.
Enclosure, then connect the remaining end of the cable to the host
computer.
With the host computer powered on, power on the Drive Enclosure 9.
using the On/Off switch. The operating system will detect the presence
of the added drive, following which you will be able to properly format/
partition the installed drive from within the operating system.
Technical Specications
Bus Type USB 2.0
Maximum Date Transfer Rate 480 Mb/s
Enclosure Casing Material Aluminum
Power Adapter 12VDC, 2A
LED Indicators
Solid Green -Power status
Blinking Green - Read/Write Drive
Activity
Drive Capacity Maximum Up to 1.5 Terabyte
Chipset SunPlus SPIF301
OS Support Window 2000/XP/Vista,
Mac OS 9.0 and up, Linux
Product Dimensions (L x W x H) 193 mm x 113 mm x 31 mm
(7.6” x 4.45” x 1.22”)
Product Weight 325 g (11.47 oz )