StarTech.com ST100SLP Introduction, Features, System requirements, Package contents

Instruction Manual

Introduction

Thank you for purchasing a StarTech.com 10/100 Mbits/sec PCI Ethernet card. Featuring Auto-Negotiation capability and support for data transmission bandwidth from 10Mbps to 100Mbps, the card is easy to install and set up, and is fully Plug and Play compatible in a wide range of operating environments.

Features

•Support for IEEE802.3x Full-Duplex flow control

•Capable of full and half-duplex communications

•Complies with industry standards: IEEE 802.3, 100BaseTX and 10BaseT standard

•Supports 32-bit PCI Bus Master for high performance and low processor utilization

System requirements:

•An IBM-compatible computer with a Pentium-based processor

•An available PCI slot

•One of the following operating environments: Windows Vista/XP/ME/2000/98/95, Windows NT, Linux, NetWare 3.x/4.x, Lan Manager, TCP/IP software

Package contents:

This package should contain:

•1 x PCI Ethernet Adapter card

•1 x Driver disk

•1 x Installation Guide

•1 x Full-size Bracket (ST100SLP only)

1