State Industries 200 Series, 201 Series warranty Flammable Vapor Ignition Resistant Water Heaters

ANODE ROD*

R E S I D E N T I A L

SELECT®

Residential Gas Water Heaters

MODEL

NUMBER

PEAK

DIMENSIONS IN INCHES

APPROX

DEMAND

BTU INPUT

RECOVERY

FOAM

SERIES

OUTPUT

ENERGY

GALLON

THICK-

SHIPPING

(1st Hour

FACTOR

CAPACITY

PER HOUR

90°F RISE

NESS

A

B

C

D

E

F

DRAFT WEIGHT

Rating

NATURAL†

GALLONS

(Inches)

HOOD

(LBS)

OUTLET

Gallons)

TALL MODELS

200						41	1	61-3/4 58-1/4	18	13		51-3/4	138
	GS6 50 YBRT 200	88	.58	50	40,000	41	1	60-3/4 57	20	13	8	50-1/4 3 or 4	153
	SHORT MODEL

GS6 40 YBRS 200

70 .59 40 40,000 41 1 51-1/2 47-3/4 20 13 8 41 3 or 4 135

HIGH EFFICIENCY MODELS

GS6 40 YOCT	200		.62		40,000	41	2	61-3/4	58-1/4	20	13		51-3/4	3 or 4	150
GS6 50 YOCT	200	88	.62	50	40,000	41	2	61	57-1/4	22	13	8	50-1/4	3 or 4	165

Recoveries are rounded to nearest gallon. Water Connections – 3/4" male on all models.

External heat trap nipples are factory installed on all models.

† Propane Gas – 37,000 input for 50-gallon models, 36,000 input for 40-gallon models.

For 10-Year Tank and 6-Year Parts Warranty, change "6" to "X" in Model Number (GSX 40 YBRT). When ordering Propane, change "Y" to "H" in model number (GS6 40 HBRT).

When ordering top-mounted T&P Valve, add "G" to model number (GS6 40 YBRT G). Propane (LP) models are Series 201

Flammable Vapor Ignition Resistant Water Heaters

State FVIR design meets or exceeds the American National Standards Institute standards (ANS Z21.10.1) that deal with the accidental or unintended ignition of flammable vapors, such as those emitted by gasoline.

Feature a sealed combustion chamber with air intake filter and a flame arrestor built into the water heater base. In addition, a thermal cutoff (TCO) device, is designed to shut off gas flow to the burner and pilot if

poor combustion is detected.

If flammable vapors accidentally enter the combustion chamber, the arrestor is designed so flames burn off the top surface and can not escape down through the arrestor.

		D
	A
B			D

C

A. Industry standard thermocouple

B. Large View Port for easy burner inspection C. 3600 combustion air filter

D. Thermal Cutoff (TCO) with manual reset

CONNECTION

COLD

CONNECTION

E

C

T&P VALVE
1/2" GAS			A
		B
CONNECTION	F

D

For complete information on limited warranties, consult written warranty, or contact the State Customer Care Center, 1-800-365-0024.

State Industries, Inc. reserves the right to make product changes or improvements without prior notice.

*Location for optional top-mounted T&P Valve if ordered from factory.

Maximum Hydrostatic Working Pressure: 150 PSI.

For more information on Select® contact: State Water Heaters

500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

SRGSS02408 August 2008R