State Industries FORCE 90TM warranty Power-VentCommercial Gas Water Heater, Phone, SCGSS00806

FORCE 90™ 90% EFFICIENT

Power-Vent Commercial Gas Water Heater

The 50-gallon, 76,000 BTU Force 90 light-duty commercial gas water heater is equipped with a fully submerged, spiral-shaped condensing heat exchanger. This design provides much greater heat transfer surface than a standard straight flue tube, resulting in 90% thermal efficiency and higher hot water output than comparable 80% efficient water heaters. With 22" diameter, the 50-gallon Force 90 can be installed in less space than a 75-gallon unit and delivers greater recovery and lower operating costs.

Power-Vent Design for Installation Versatility

•Modular blower, with 120 volt, 60Hz electrical system (5 amps or less), 6-foot cord with standard 3-prong connector

•Combined horizontal and vertical vent runs terminating through outside wall, using Schedule 40 PVC pipe as follows:

-2" pipe allows vent runs up to 25 equivalent feet

-3" pipe allows vent runs up to 65 equivalent feet

-4" pipe allows vent runs up to 128 equivalent feet

•Supplied with PVC pipe and elbows to connect heat exchanger outlet to blower, including condensate elbow and drain

•PVC Vent Attenuation Assembly (VAA) supplied to help ensure extra-quiet operation

Side-Mounted Taps for Recirculating Systems

•Hot and cold “side taps” allow Force 90 to be used for “combination” systems for water heating plus space heating, radiant floor heating or other applications requiring a recirculating hot water loop

•Plugs for recirculating taps are factory installed

Intelli-Vent®*Gas Control with Silicon Nitride Hot Surface Ignitor

•Premium-grade hot surface ignitor eliminates standing pilot

•Electronic circuitry provides superior system diagnostic capabilities plus extremely precise temperature control

•180°F maximum temperature setting

Glass Lined Tank with Two Magnesium Anode Rods

•Provides superior protection against corrosion

•Glass lining protects all “water side” tank surfaces plus inside of internal heat exchanger exposed to condensate

Low-NOx Green Choice® Burner

•Reduces NOx emissions up to 33%, complies with Southern California and Texas requirements

PEXAN™ Diffuser Dip Tube

•Helps reduce lime and sediment buildup, maximize hot water output

•PEXAN cross-link polymer withstands long-term exposure to temperatures up to 400°F

Factory-Installed Temperature and Pressure Relief Valve Maximum Hydrostatic Working Pressure: 150 psi Meets ASHRAE/IESNA 90.1-1999

•Design-certified by UL (Underwriters Laboratories) according to ANSI Z21.10.3-CSA4.3 standards governing storage-type water heaters

Three-Year Limited Tank Warranty

•Consult written warranty shipped with water heater or contact State for complete warranty information

* Intelli-Vent is a registered trademark of the Emerson Electric Company

For Additional Technical Information,

PHONE 800-365-0024

State Industries, Inc.

500 Tennessee Waltz Parkway, Ashland City, TN 37015 www.statewaterheaters.com

Page 1 of 2

SCGSS00806