State Industries GS6 40 HBRT Peak Dimensions in Inches Approx, Model, Shipping, 90F Rise, Number

R E S I D E N T I A L

SELECT®

Residential Gas Water Heaters

	PEAK								DIMENSIONS IN INCHES					APPROX.
	DEMAND			BTU INPUT RECOVERY
MODEL	OUTPUT	ENERGY	GALLON			R								SHIPPING
				PER HOUR	90°F RISE								DRAFT
NUMBER	(1st Hour FACTOR		CAPACITY			VALUE**	A	B	C	D	E	F		WEIGHT
	Rating			NATURAL†	GALLONS								HOOD	(LBS)
													OUTLET
	Gallons)
TALL MODELS
GS6 30 YBRT	66	0.62	28	40,000	41	8	59-5/8 55-1/4		16	13-3/8	8	49-7/8	3 or 4	112
GS6 40 YBRT	71	0.59	38	40,000	39	8	57-5/8 53-1/4		18-1/2	13-3/8	8	47-3/8	3 or 4	126
GS6 50 YBRT	91	0.58	50	40,000	41	8	60-7/8	56-1/2	20	13-3/8	8	50-3/8	3 or 4	160
SHORT MODELS
GS6 30 YBRS	66	0.61	30	40,000	40	8	48-1/8 43-3/4		18-1/2	13-3/8	8	36-5/8	3 or 4	122
GS6 40 YBRS	71	0.59	40	40,000	41	8	51-5/8	47-1/4	20	13-3/8	8	41	3 or 4	139
GS6 50 YBRS	80	0.58	50	40,000	41	16	53-1/4	48-3/4	24	13-3/8	8	43-1/2	3 or 4	168

Recoveries are rounded to nearest gallon.

Water Connections – 3/4" male on all models except GS6 50 YBRT (3/4" female). External heat trap nipples are supplied on all models except GS6 50 YBRT.

† Propane Gas – 37,000 BTU models.

**All models are 1-inch foam except GS6 50 YBRS (2-inch foam).

For 10-Year Tank and 6-Year Parts Warranty, change "6" to "X" in Model Number (GSX 40 YBRT). When ordering Propane, change "Y" to "H" in model number (GS6 40 HBRT).

When ordering top-mounted T&P Valve, add "G" to model number (GS6 40 YBRT G).

Flammable Vapor Ignition Resistant C3 Technology® Water Heaters

Corderite Combustion Containment (C3) design meets American National Standards Institute standards (ANS Z21.10.1-CSA 4.1) that deal with the accidental or unintended ignition of flammable vapors, such as those emitted by gasoline.

Covered by four U.S. patents, C3 Technology gas water heaters feature a sealed combustion chamber with air intake screen and a fireproof Corderite flame arrestor built into the water heater base. In addition, a Thermal Cutoff (TCO) device, integral with the thermocouple, is designed to shut off gas flow to the burner and pilot if poor combustion is detected.

In the unlikely event that flammable vapors accidentally enter the combustion chamber, the Corderite flame arrestor is designed so any flames burn off the top surface and cannot escape down through the arrestor.

A.Easy-to-light Piezo Ignitor

B.View port for easy inspection of burner inside sealed combustion chamber

For complete information on limited warranties, consult written warranty, or contact the State Customer Care Center, 1-800-365-0024.

State Industries, Inc. reserves the right to make product changes or improvements without prior notice.

For more information on Select® contact: State Water Heaters

500 Tennessee Waltz Parkway, Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

SRGSS01206 January 2008R

*Location for optional top-mounted T&P Valve,

if ordered from factory. To order, add “G” to model number (GS6 40 YBRTG).