State Industries SCESS00308 warranty KW Input, Sandblaster Electric Sample Specifications

C O M M E R C I A L

SANDBLASTER

Commercial Electric Water Heaters

Reading Sandblaster Electric Water Heater Model Numbers

C S B 5 2 1 8 S F E

MODEL NAME

CSB = Commercial Sandblaster

CAPACITY

52 = 50 gallons

82 = 80 gallons

120 = 119 gallons

kW INPUT

6 = 6 kW

9 = 9 kW

12 = 12 kW

135 = 13.5 kW

15 = 15 kW

18 = 18 kW

24 = 24 kW

27 = 27 kW

30 = 30 kW

36 = 36 kW

405 = 40.5 kW

45 = 45 kW

54 = 54 kW

THERMOST AT

TYPE

S = Surface

I = Immersion

FUSED

All Models Fused

ADDERS

A = ASME Construction

B = 480 Volt

CSA = Canadian Construction

NC = North Carolina Requirements

X = 208 Volt

Y = 277 Volt (only single-phase)

WARRANTY

E = 3 Years

SPECIAL NOTE: All model numbers appearing on rating plate and carton labels will be compressed.

EXAMPLES: CSB5254IFE; CSB8254IFE; CSB12054IFE.

Sandblaster Electric Sample Specifications

The heater(s) shall be Sandblaster Commercial Electric Model Number				as manufactured by State Water Heaters or an approved equal. Heater(s) shall be rated
at	kW,	volts,	phase, 60 cycle AC, and listed by Underwriter’s Laboratories. Tank(s) shall be		gallon capacity. Heater(s) shall

have 150 psi working pressure and be equipped with extruded high density anode. All internal surfaces of the heater(s) exposed to water shall be glass-lined with an alkaline borosilicate composition that has been fused-to-steel by firing at a temperature range of 1400°F to 1600°F. Electric heating elements shall be low watt density with incoloy sheath and 1˝ screw-in type. Each element shall be controlled by an individually mounted thermostat and high temperature cut-off switch. All internal circuits shall be fused. The outer jacket shall be of baked enamel finish and shall be provided with full size control compartment for performance of service and maintenance through hinged front panel and shall enclose the tank with foam insulation. Electrical junction box with heavy duty terminal block shall be provided. The drain valve shall be located in the front for ease of servicing. Heater tank shall have a three-year limited warranty as outlined in the written warranty. Manufacturer shall supply CSA Certified and ASME Rated T&P Relief Valve.

In keeping with our policy of continuous product improvement, specifications are subject to change without prior notice. For complete details on Commercial Water Heater Warranties, contact State Water Heaters or your State Sales Representative.

For more information on the Sandblaster® contact: State Water Heaters

500 Tennessee Waltz Parkway, Ashland City, TN 37015

800-365-0024 Toll-free USA www.statewaterheaters.com

SCESS00308

©2008 State Water Heaters Printed in U.S.A.