CG rsb STIGA-71503821/0 29-12-2003 17:33 Pagina 53
GB | ENGLISH | GB |
|
|
|
SAFETY REGULATIONS
A)TRAINING
1)Read the instructions carefully. Get familiar with the controls and the proper use of the equipment. Learn how to stop the engine quick- ly.
2)Only use the lawnmower for the purpose for which it was designed, i.e. for cutting and col- lecting grass. Any other use can be hazardous, causing injury or damage to people and/or property.
3)Never allow children or people unfamiliar with these instructions to use the lawnmower. Local regulations may restrict the age of the operator.
4)Never use the lawnmower:
–When people, especially children, or pets are nearby;
–If the operator has taken medicine or sub- stances that can affect his ability to react and concentrate.
5) Remember that the operator or user is responsible for accidents or hazards occurring to other people or their property.
B)PREPARATION
1)While mowing, always wear sturdy footwear and long trousers. Do not operate the equip- ment when barefoot or wearing open sandals.
2)Thoroughly inspect the area where the equip- ment is to be used and remove all objects which may be thrown by the machine (stones, sticks, metal wire, bones, etc.)
3)Before use, always inspect the machine, especially the condition of the blades, and check that the screws and cutting assembly are not worn or damaged. Replace worn or dam- aged blades and screws in sets to preserve bal- ance.
4)Before mowing, attach the discharge opening guards
5)WARNING: DANGER! Damp and electricity do not go together:
– cables must be handled and wired when dry
– never allow contact between an electric socket or cable with a wet area (puddles or damp grass);
– connections between cables and sockets must be of the waterproof type. Only use exten- sion cables with
– power the machine using a residual current device (RCD Residual Current Device) with max. 30 mA tripping current.
6)The power supply cables must not be of lower quality than the
7)Attach the cable onto the cable clamp before
starting the machine.
8)The permanent wiring of any electrical device to the mains must be carried out by a qualified electrician, in accordance with electrical regu- lations in force. Incorrect wiring may cause severe injury or death.
C)OPERATION
1)Mow only in daylight or good artificial light.
2)Avoid operating the equipment on wet grass or in the rain.
3)Never go over the electric cable with the lawnmower. While cutting, the cable should always be pulled behind the lawnmower and always from the area of grass already cut. Use the cable clamp as described in this manual to prevent the cable from disconnecting by acci- dent. Ensure that it is properly inserted without forcing into the power socket.
4)Never pull the lawnmower by its power cable or pull the cable to remove the plug. Do not expose the cable to sources of heat or let it come in contact with oil, solvents or sharp objects.
5)Always be sure of your footing on slopes.
6)Walk, never run and do not allow yourself to be pulled along by the lawnmower.
7)Mow across the face of slopes, never up and down.
8)Exercise extreme caution when changing direction on slopes.
9)Do not mow on slopes that are too steep.
10)Exercise extreme caution when pulling the lawnmower towards you.
11)Stop the blade if the lawnmower has to be tilted for transportation when crossing surfaces other than grass, and when transporting the lawnmower to and from the area to be mowed.
12)Never operate the lawnmower with defec- tive guards, or without safety devices, such as the
13)On
14)Start the engine carefully, following the instructions and keeping feet well away from the blade.
15)Do not tilt the lawnmower when switching on the engine unless it is strictly necessary for
16)Do not put hands or feet near or under rotat- ing parts. Keep clear of the discharge opening at all times.
17)Never pick up or carry a lawnmower while the engine is running.
18)Stop the engine and disconnect the power supply cable:
–before carrying out any work underneath the
53
