ENGLISH

GB

 

 

 

3.6 Cable for reverse control

4.4

Handle (1:B)

Only applies to 500R-G.

The handle has two handgrips that are used to op-

The cable is marked R.

erate the machine over the area to be cultivated.

1.

Hook the cable in the reverse control (1:C) and

4.5

Fuel cap

 

insert the cable in the gap in the cable housing’s

 

See the accompanying engine manual.

 

mounting on the left handle.

2.

Adjust the cable sleeve if necessary.

Unscrew the fuel cap to fill with petrol. The fuel

3.7 Drive cable

cap must always be closed during operation.

4.6

Angle adjustment handle (1:E)

1.

Hook the cable in the drive control (1:D) and in-

Release the knob and set the handle to the desired

 

sert the cable in the gap in the cable housing’s

 

mounting on the left handle.

angle.

2.

Adjust the cable sleeve if necessary.

Then retighten the knob again.

3.8 Front protection

Install the front protection (5:J). Use the screws supplied.

4.7 Height adjustment handle (1:F)

Slacken off the screws and set the handle to the de- sired height.

Then retighten the screws again.

4 DESCRIPTION

The rotary cultivator is driven by a four-stroke en- gine and is intended for soil cultivation in private gardens. The most important parts and controls of the rotary cultivator are described below.

4.1 Reverse control (1:C)

Only applies to 500R-G.

The control is used to start the rotor for reverse when the engine is running.

The reverse control and drive control (1:D) must never be activated at the same time.

Control in idle mode (forward) – No drive.

Control moved backwards – The machine reverses.

4.2 Drive control (1:D)

The control is used to start the rotor for forward motion when the engine is running.

The reverse control (1:C) and drive control must never be activated at the same time.

Control in idle mode (down) – No drive.

Control pulled in – Forward operation.

4.3 Throttle and stop (1:A)

The control determines the engine’s rpm and has start and stop positions.

4.8 Oil filling/draining

Always check the oil level before start- ing the engine.

See the accompanying engine manual. Plug for oil filler and checking the oil level.

To drain the oil, the machine must be tilted so that the oil runs out from the same hole.

4.9 Auxiliary wheel (1:H)

The auxiliary wheel is intended to assist transport of the machine and has two positions.

The auxiliary wheel must not be installed when carrying out work.

The auxiliary wheel must be installed when transporting.

Remove/install the auxiliary wheel as follows:

1.Pull out the locking pin (2:A).

2.Remove the auxiliary wheel downwards.

3.Reinstall the locking pin in the auxiliary wheel arm.

Install in reverse order

4.10Rotors (1:J)

Nobody must be close to the dangerous rotors during operation.

The rotors are made of special steel and work the soil at the same time as the machine is pro- pelled forwards.

37

Page 6
Image 6
Stiga 500-G, 500R-G manual English, Description

500R-G, 500-G specifications

The Stiga 500-G and 500R-G are premium lawn mowers designed to revolutionize the mowing experience for homeowners and gardeners alike. These models emphasize efficiency, convenience, and advanced technology, making them ideal for maintaining lush, well-kept lawns.

One of the standout features of the Stiga 500-G and 500R-G is their powerful 500 series engines. The engines are designed for optimal performance, providing ample torque to handle various grass types and terrains. This power ensures that users can tackle larger plots of land without the frequent need for refueling or recharging, making the mowing process much more seamless and efficient.

Both models are equipped with advanced cutting technology. The blades are engineered for precision cuts, ensuring a clean finish that promotes healthy grass growth. The cutting width is substantial, allowing for a wider path with each pass. Users have the option to adjust the cutting height, which provides the flexibility to adapt to different grass length preferences, ensuring that the lawn is always maintained to perfection.

In terms of user convenience, both models incorporate ergonomic design elements. The handlebar is adjustable, allowing users to find their ideal height for comfort during operation. Additionally, the intuitive controls enable easy maneuverability, making it easier for users to navigate around obstacles in their yards.

One of the significant advancements in the 500R-G model is its robotic mowing capability. Equipped with intelligent programming, the 500R-G can be set up to autonomously maintain the lawn, freeing users from the manual labor of mowing. The machine uses sensors to navigate around flowerbeds, trees, and other obstacles, making it a flexible and hands-free solution for lawn care.

Both models also prioritize durability and ease of maintenance. With high-quality materials and robust construction, they are built to withstand harsh outdoor conditions. Furthermore, they feature easy-access points for maintenance tasks, such as spark plug changes or blade sharpening, ensuring that they remain in optimal working condition throughout their lifespan.

In summary, the Stiga 500-G and 500R-G combine powerful performance, advanced cutting technology, and user-friendly design. The incorporation of robotic mowing capabilities in the 500R-G model reflects a shift towards smart gardening solutions, positioning these mowers as leaders in the backyard equipment market. Whether for conventional mowing tasks or advanced robotic care, these models cater to the diverse needs of modern lawn enthusiasts.