ENGLISH

SAFETY SYSTEM

This machine is equipped with a safety system that consists of:

-a switch at the brake pedal.

-a switch in the seat (Comfort, President) or the seat bracket (other models).

-a switch at the power take-off engagement lever.

In order to start the machine, the following are necessary:

-brake pedal pressed down.

-driver sitting on seat.

-power take-off engagement lever in forward position (i.e. power take-off disengaged).

Always check the operation of the safety system before using the machine!

With the engine running and the driver sitting on the seat, check as follows:

-press the drive pedal so that the machine starts to move, release the drive pedal – the machine must stop.

-press the drive pedal so that the machine starts to move, engage the cruise control, lift your weight off the seat – the machine must stop (applies to Royal, Pro16, Pro20).

-press the drive pedal so that the machine starts to move, engage the cruise control, press the brake pedal – the machine must stop (applies to Royal, Pro16, Pro20).

-engage the power take-off, lift your weight off the seat – the engine must stop (applies to Comfort, President, Royal, Pro16).

-engage the power take-off, lift your weight off the seat – the power take-off must be disengaged (applies to Pro20).

Do not use the machine if the safety system is not working! Take the machine to a service workshop for inspection!

5b. Royal-Pro16-Pro20 - Excellent:

Put the throttle control at full throttle. Starting cold engine – pull the choke control out fully. Starting warm engine – do not touch the choke control.

6.Depress the brake pedal fully.

7.Turn the ignition key and start the engine.

8a. Comfort-President:

Once the engine has started, move the throttle control gradually to full throttle if the choke has been used.

8b. Royal-Pro16-Pro20 - Excellent:

Once the engine has started, push the choke control in gradually if it has been used.

9.When starting from cold, do not make the machine work under load immediately, but let the engine run for a few minutes first. This will allow the oil to warm up.

When in use, always operate the engine at full throttle.

STOPPING

Disengage the power take-off. Apply the parking brake.

Allow the engine to idle 1 - 2 mins. Stop the engine by turning off the starter key.

Shut off the petrol cock. This is particularly important if the machine is to be transported on a trailer for example.

If the machine is left unattended, remove the spark plug cable from the spark plug. Also remove the starter key.

The engine may be very warm immediately after it is shut off. Do not touch the silencer, cylinder or cooling fins. This can cause burn injuries.

STARTING ENGINE

1.Open the fuel cock (fig. 12).

2.Make sure that the spark plug cable is properly in place.

3.Check to make sure that the power take-off is disengaged.

4.Do not keep your foot on the drive pedal.

5a. Comfort-President:

Starting cold engine – put the throttle control in the choke position. Starting warm engine – put the throttle control at full throttle (approx. 1 cm behind the choke position).

CATALYTIC CONVERTER (Pro20 Cat)

The catalytic converter gets very hot during operation. The heat remains for a long time after the engine has been stopped. Be aware of the fire risk.

Do not park in close proximity to inflammable objects. Do not cover the machine until the catalytic converter has cooled down.

55

Page 9 Page 11
Page 10
Image 10
Stiga 8211-0276-08 manual Safety System, Stopping, Starting Engine, Catalytic Converter Pro20 Cat
Page 9 Page 11

8211-0276-08 specifications

The Stiga 8211-0276-08 is a versatile and efficient lawn mower designed for residential use, providing homeowners with an exceptional mowing experience. Known for its robust construction and innovative features, this model ensures a neatly manicured lawn with minimal effort.

One of the standout features of the Stiga 8211-0276-08 is its powerful engine. The mower is equipped with a reliable four-stroke engine that delivers efficient performance and ensures that grass cutting is smooth and consistent. This engine not only boosts cutting power but also enhances fuel efficiency, allowing users to mow larger areas without frequent stops for refueling.

The Stiga 8211-0276-08 boasts a cutting width of 42 centimeters, making it ideal for medium-sized lawns. The precision cutting blades are designed to handle various grass types and thicknesses, ensuring excellent results every time. Users have the option to adjust the cutting height, with settings available from 25 mm to 75 mm, allowing for personalized lawn care depending on the season and grass growth conditions.

Another key characteristic of this mower is its lightweight design, which contributes to easy maneuverability. The ergonomic handle provides comfort during operation, reducing fatigue during extended use. The mower is designed with user-friendly controls, making it accessible for both novice and experienced users.

The Stiga 8211-0276-08 also integrates advanced technologies that enhance functionality. For instance, the model features a robust grass collector that holds a significant amount of grass clippings, reducing the need for frequent emptying. This not only saves time but also allows for a cleaner mowing process. Furthermore, the mower's rear discharge feature provides the option to leave clippings on the lawn for additional nutrients, promoting a healthier grass environment.

Durability is another hallmark of the Stiga 8211-0276-08, with high-quality materials that withstand various weather conditions and regular use. This ensures longevity and reliability, making it a sound investment for any homeowner looking to maintain a beautiful lawn year-round.

Overall, the Stiga 8211-0276-08 is a well-rounded lawn mower that combines power, efficiency, and ease of use. Its thoughtful design and premium features make it an excellent choice for anyone looking to simplify their lawn care routine while achieving professional-looking results.
Top Page Image Contents