ENGLISH | GB |
|
|
Always use original spare parts. Using
The cutting system consists of three blade bars, each with two interchangeable blade tips Y (fig 15). Both blade tips should be replaced at the same time to avoid any imbalance.
Fit the new blade tips. Tighten the screws V and W fully. Tightening torque: V - 9.8 Nm, W - 24 Nm.
And heavy impact can result in the blade tip being folded aside. Loosen the locking nut X and turn the blade tip back to its correct position. Mount a new shear bolt V. Tighten the lock nuts X and Z.
SPARE PARTS
STIGA original spare parts and accessories are constructed exclusively for STIGA machines. Note that non original spare parts and accessories have not been checked or approved by STIGA.
Usage of such parts and accessories can influence the machines operability and safety. STIGA cannot be held responsi- ble for injuries caused by these prod- ucts.
STIGA reserves the right to modify the product without prior notice.
7
