GB | ENGLISH |
|
|
SYMBOLS
The following symbols are displayed on the ma- chine in order to remind you about the safety pre- cautions and attention necessary when using the machine.
The symbols mean:
Warning! Read the Instruction Book and Safety Manual before using the machine.
Warning! Keep spectators away. Beware of objects being flung out.
Warning! Before starting any repair work, disconnect the plug from the wall socket.
Warning! Keep the extension cord away from the cutting deck.
Warning! Do not put hands or feet under the cover of the machine when it is running.
Warning! The blades continue to rotate even after the machine has been switched off.
STOP
ASSEMBLING
WHEELS type I (fig. 5)
1.Fit the bearings F in the wheel.
2.Apply the parts B, (F) and A on the wheel bolt.
3.
4.Fasten the wheel on the mower.
5.Tighten securely by hand using the
WHEELS type II (fig. 6)
1.Fit the bearings F in the wheel.
2.Apply the parts B, G, E, (F) and A on the wheel bolt.
3.
4.Fasten the wheel on the mower.
5.Tighten securely by hand using the
STEERING type I (fig. 7)
1 . Insert the tubes into the ends of the handlebar.
2.Fit the screws. Tighten securely.
3.Insert the ends of the U tube into the holes in the chassis.
4.Fit the screws. Tighten securely.
5.Attach the handle to the U tube using the bolts, washers and locking knobs provided. The han- dlebar can be folded forwards by undoing the locking knobs slightly. This reduces the space the mower takes up during transport, etc.
6.Secure the electrical cable into the cable holder.
7.Fix the electrical cable using a cable tie.
PARTS TO ASSEMBLE
Wheel type I (fig. 1)
Wheel type II (fig. 2)
Steering type I (fig. 3)
Steering type II (fig. 4)
TOOLS FOR ASSEMBLEY
STEERING type II (fig. 8)
1.Press the plugs into the steering sockets. Ensure that the plugs are inserted in the correct end.
2.Press the steering sockets into the holes in the chassis.
3.Fit the screws. Tighten securely.
4.Attach the handlebar to the steering sockets us- ing screws, washers and locking knobs. The handlebar can be tilted forward by loosening the locking knobs slightly. The mower will then take up less space during transportation.
5.Fix the electrical cable using a cable tie.
8
