Tensioning the rewind spring
217BA050 KN
NMake a loop in the unwound starter rope and use it to turn the rope rotor six full revolutions in the direction of the arrow.
NHold the rotor steady.
NPull out and straighten the twisted rope.
NLet go of the rotor.
NRelease the rope slowly so that it winds onto the rotor.
The starter grip must locate firmly in the rope bushing. If the grip droops to one side: Add one more turn on the rope rotor to increase spring tension.
When the starter rope is fully extended it must still be possible to rotate the rotor another half turn. If this is not the case, the spring is overtensioned and could break.
NTake one turn of the rope off the rotor.
Replacing a broken rewind spring
NRemove the rope rotor.
The bits of spring must still be under tension and could fly apart when you take them out of the housing. To reduce the risk of injury, wear face protection and work gloves.
NUse a screwdriver to carefully remove the parts of the spring from the housing.
NLubricate the new spring with a few drops of
NPlace the new spring with retaining frame in position in the fan housing
– the anchor loop must engage the lug in the housing.
NApply suitable tools (screwdriver, punch, etc.) to the recesses (arrows) and push the spring into its seat – it slips out of the retaining frame in this process.
NReinstall the rope rotor, tension the rewind spring, fit the fan housing and secure it in position.
English
Storing the Machine
For periods of 3 months or longer
NDrain and clean the fuel tank in a well ventilated area.
NDispose of fuel properly in accordance with local environmental requirements.
NRun the engine until the carburetor is dry – this helps prevent the carburetor diaphragms sticking together.
NRemove the saw chain and guide bar, clean them and spray with corrosion inhibiting oil.
NThoroughly clean the machine – pay special attention to the cylinder fins and air filter.
NIf you use a biological chain and bar lubricant, e.g. STIHL BioPlus, completely fill the chain oil tank.
NStore the machine in a dry, high or locked location, out of the reach of children and other unauthorized persons.
MS 192 C | 41 |