English
001BA193 KN
NPress in the button to open the decompression valve.
The decompression valve closes as soon as the engine fires. For this reason you must press in the button before each starting attempt.
0
1
4 | 2 |
|
3 |
| |
| KN | |
|
| 001BA201 |
NPush the hand guard (1) forward – the chain is locked.
NPress down the trigger interlock (2) and pull the throttle trigger (3) at the same time. Set Master Control lever (4) to:
Choke shutter closed (l)
–If the engine is cold (also use this position if the engine stopped when you opened the throttle after starting)
Starting throttle (n)
–If the engine is warm, i.e. if it has been running for about one minute.
NHold and start your saw as described.
When the engine begins to fire:
STOP 
1 0
001BA202 KN
NSet the Master Control lever (1) to starting throttle position (n).
NPress in button to open the decompression valve.
NHold and start your saw as described.
As soon as the engine runs
STOP 
1 0
2 | KN | |
001BA198 | ||
|
NBlip the throttle trigger (2) the Master Control lever (1) moves to the run position Fand the engine settles down to idling speed.
001BA186 KN
NPull the hand guard back toward the front handle.
The chain brake is now disengaged – your saw is ready for operation.
Always disengage chain brake before accelerating the engine.
High revs with the chain brake engaged (chain locked) will quickly damage the clutch and chain brake.
34 | MS 362 C |