StorageTek 96127 installation instructions LC to LC Duplex FC cables

Installation

3.Connect the other end of the fibre cable(s) to the Host Bus Adapter (HBA). See example below.

LC to LC Duplex FC cables

Note: Refer to StorageTek’s Interop Tool for the latest connectivity information.

If necessary, refer to the 200/300 Series Installation Guides and User Guides or to BladeStore’s Installation, Operation, and Maintenance Guide to learn how to route the drive interface cables to the drive tray/blade tray ESMs.

The following example shows a drawing of a BladeStore cabling configuration to help you install this particular storage system in a non-StorageTek cabinet. For most FlexLine™ 200/300 Series storage system configurations, however, refer to the Hardware Cabling Guide (p/n EH14782), which depicts most of the configurations shipped from the factory.

Additional information to assist with your installation may be found on the engineering web pages. Scroll down to find links to: tuning, zoning, snapshot, cabinet information, and alternate configurations. Access these web page links by going to http://gandalf.stortek.com/ctp/

96127	Second Edition	9
	StorageTek Proprietary