USER AND INSTALLATION INSTRUCTIONS
Covering the following front:
Logic | 8698 | MB |
| 8698 | P |
8697 | MB | |
8697 | P |
USER INSTRUCTIONS
1.CLEANING AND CONTROLS
1.1Only clean the front when it is cold. The front should be cleaned using a damp cloth and buffed with a lint free duster.
1.2Access to the controls is behind the ash pan cover.
INSTALLATION
INSTRUCTIONS
These instructions are supplemental to and must be read in conjunction with the Installation Instructions supplied with the gas fire. Read both thoroughly before installing the appliance.
Fitting of this front is to be carried out after the appliance has been fully installed but before the commissioning tests. Except for use with the
1. FRONT DIMENSIONS
Diagram 1 shows the Winchester Front dimensions for the Logic hotbox, Logic Convector and Logic IPF:
1 | 30 |
| |
| 508 |
|
| 337 | 618 |
| 210 |
|
71 | 375 | 55 |
|
AR2177
Diagram 2 shows the Winchester Front dimensions for the
2 |
| 30 |
| |
|
|
| ||
|
| 508 |
|
|
|
|
|
| |
|
| 28 | 40 |
|
|
| 269 |
|
|
|
|
| 618 |
|
|
| 210 |
|
|
71 | 365 | 55 | AR2178 | |
|
|
|
| |
|
|
|
|
|
2. FItting FOR ALL FIRE TYPES
There is a bracket on the reverse side of the front at the top edge:
•Hook the bracket onto the lugs at the top of the fire,
Diagram 3
3
AR2179
There are two flat clips supplied to grip the bottom edge of the front to the fire:
•Clip each side of the front to the fire as shown in
Diagram 4
4
AR2180
• Slide the ash pan cover into place
Gazco Limited, Osprey Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7JG
Tel: (01392) 261999 Fax: (01392) 444148
A member of the Stovax Group