ASSEMBLY INSTRUCTIONS
5
PR7569
5.Slide The bench over the coach bolts and tighten. Position drilling template as you would the stove.
6
PR7570
6.Mark drilling points with a centre punch.
7
PR7571
7.Drill four Ø8mm holes. Straight through both
sides.
8
PR7572
8.Remove back cover plate from the stove.
9
PR7573
9.Lift off stove cover plate.
10
Felt pads
PR7574
10.Firstly remove all internal parts from the stove and remove the door. Tip the stove onto its front on a soft surface that will not damage the paintwork. Apply felt pads to each corner of the base.
3