Stovax RVF40AVM, RVF40AVH manual Fitting and Removal of Baffles

MAINTENANCE and SERVICING

This is a list of the maintenance products you may need to use

Task	Product name	Stovax Code
		number
Glass cleaning	Stove glass cleaner 500ml –	4111
	wipe on
	Stove glass cleaner –	4130
	spray on
Preventing build-up	Protector (15 sachets)	7002
of creosote in flue	Protector (1kg tub)	7025
Sealing flue	Fire Cement - 500g tub	2020
pipe joints	Fire Cement - 600g cartridge	2021
Re-painting	Storm Metallic	RVAC010
	Metallic Black	RVAC011
Protecting your	Heat resistant leather gloves	4008
hands
Door sealing rope	16mm White rope seal –	5001
	Handy pack	4096
	16mm White rope seal –
	20m reel
Glass sealing tape	20mm x 2mm Black tape seal –	4998
	Handy pack	4997
	20mm x 2mm Black tape seal –
	20m reel
Fixing door seal	Thermic seal glue – 50ml	5037
Holding Tools	Optional tool holder	RVAC015

These products, all available from you local Stovax dealer, along with regular maintenance and use of the correct fuels, will help you to keep your stove in the best possible condition.

4.15When using the stove for the first time again it is best to burn the fire at a low output for the first day of use. This will allow the new seals to settle and all new fixing glues and paint to fully cure.

During this time the stove may give off some unpleasant odours, and we recommend that you keep the room well ventilated during this period to avoid a build-up of fumes.

If you require help your local Stovax dealer will be able to carry-out all of your service and maintenance requirements for a reasonable cost.

5.FITTING AND REMOVAL OF BAFFLES

5.1To maintain efficient combustion the Riva stove is fitted with a twin baffle system, consisting of upper and lower baffles.

Upper baffle

Lower baffle

5.2Allow the stove to cool fully before removing baffle system.

5.3To remove the baffle, first remove the Log Guard from the stove to give access to the firebox.

5.4First remove the Lower Baffle by lifting the front edge to unhook it from the support bars, then pull the baffle forward to disengage the rear edge from the location above air inlet holes. Rotate the baffle to remove from the firebox through the door opening.

Lower baffle PR7099

5.5Second remove the Upper Baffle by pulling forward to disengage it from the hanging points at the top of the firebox. Rotate the baffle to remove from the firebox through the door opening..

10