CAUTION

Do not install an elastomeric mount without the use of an approved lubricant. Installation without an approved lubricant can produce tears in the mount, resulting in substandard operational performance and service life.

9)Support the elastomeric mount, socket and mounting plate as depicted in FIGURE 50. The mounting plate must be suspended from the arbor press to allow the mount to clear when the pressing process is completed. A short section of 1-1/2 inch inside diameter steel tubing can be utilized for this purpose. Using the arbor press, apply a steady force in a straight line direction to the mount until it fully penetrates the cavity in the mounting disc. Do not attempt to push the elastomeric mount through the mounting disc with excessive force. Damage to the elastomeric mount will result.

10)Reassemble the mounting disc to the transmission shaft.

11)Reassemble the mounting plate to the mounting disc.

12)Reassemble the aluminum multi-accessory disc to the mounting plate.

13)Check to determine that the replacement elastomeric mounts allow for proper position of the aluminum multi- accessory disc. If the elastomeric mounts are not properly positioned, they will require removal and reinstallation. The removal process can produce tears and abrasions in the mount that will require new replacements.

MAINTENANCE/SERVICE

LUBRICATION REQUIREMENTS

Parts Required:

1 each, standard grease gun filled with one of the following: ESSO Beacon 325, Shell Alvania #2, Chevron SRI, or equivalent.

1 each, container of dry film lubricant.

1)Lubricate the caster wheel bearings with a dry film lubricant only. Dry film lubricants dry immediately upon contact. Use sparingly. Excess lubricant will attract the fine grained, powdered materials described and directly affect bearing service life.

CAUTION

Do not lubricate the caster wheels with any type of grease material. Grease will attract foreign material accumulations that can accelerate bearing wear.

2)The transmission gears are supported by extra capacity, ball bearing units. Bearings are lubricated at the time of manufacture and do not require additional servicing when placing the unit in initial service. Zerk grease fittings can promote improper service schedules and an excessive amount of over lubrication. Excess grease escaping from around the bearing insert seals will attract foreign material accumulations that can drastically shorten their service life. Excessive amounts of grease in the bearing race cavity can actually increase friction and resulting heat increases that can also dramatically shorten bearing service life.

FIGURE 50

FIGURE 51. LUBRICATION POINTS

SFG10E ELECTRIC SURFACE GRINDER — OPERATION AND PARTS MANUAL — REV. #1 (07/16/07) — PAGE 34

Page 33 Page 35
Page 34
Image 34
Stow SFG10E manual Lubrication Points, Lubrication Requirements
Page 33 Page 35

SFG10E specifications

The Stow SFG10E is a versatile and robust generator designed for various applications, making it an ideal solution for both commercial and residential use. Its compact size and durable construction cater to the need for reliable power in both urban and rural settings.

One of the main features of the SFG10E is its impressive power output. With a maximum output of 10 kVA, it is capable of handling several appliances and tools simultaneously, making it perfect for construction sites, outdoor events, and backup power for homes during outages. The generator is powered by a highly efficient diesel engine, providing enhanced fuel economy and extended run times, which is vital for users who require consistent power for extended periods.

The SFG10E is equipped with advanced technologies that enhance its performance and usability. Its automatic voltage regulation (AVR) ensures that the output voltage remains stable, protecting connected devices from voltage spikes and fluctuations that could cause damage. Additionally, the generator features an easy-to-read digital control panel, allowing users to monitor performance metrics such as voltage, frequency, and runtime at a glance.

Another characteristic that sets the SFG10E apart is its user-friendly design. It features a built-in fuel gauge, making it easy for users to monitor fuel levels and plan for refueling as needed. The compact and lightweight design ensures portability, making it easy to transport to different locations when required. Furthermore, the generator is designed with noise reduction in mind. Its sound-dampening technology minimizes operational noise, making it suitable for use in noise-sensitive environments.

Safety is also a priority in the design of the SFG10E. It includes several safety features such as low oil shutdown, overload protection, and an emergency stop function, providing peace of mind to users who depend on it for their power needs. Its rugged construction is further enhanced by weather-resistant materials, allowing it to withstand the elements, whether in sunny, rainy, or windy conditions.

In conclusion, the Stow SFG10E generator combines power, efficiency, and safety in a compact and portable design. With its advanced features and technologies, it stands out as a dependable choice for those needing reliable electricity in various environments, whether at home, on a job site, or while enjoying outdoor activities. Its emphasis on user-friendliness and safety makes it not just efficient but also easy to operate for users of all experience levels.
Top Page Image Contents