STOW PORTO MIXER— MAINTENANCE (GASOLINE ENGINE)

Maintenance

Perform the scheduled maintenance procedures as definded by Table 6 and below:

DAILY

■Thoroughly remove dirt and oil from the engine and control area.Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the gearbox for oil leaks. Repair or replace as needed.

WEEKLY

■Remove the fuel filter cap and clean the inside of the fuel tank.

■Remove or clean the filter at the bottom of the tank.

■Remove and clean the spark plug (Figure 32), then adjust the spark gap to 0.024 ~0.028 inch (0.6~0.7 mm).This unit has electronic ignition, which requires no adjustments.

Figure 32. Spark Plug Gap

ENGINE OIL

1.Drain the engine oil when the oil is warm as shown in Figure 33.

2.Remove the oil drain bolt and sealing washer and allow the oil to drain into a suitable container.

3.Replace engine oil with recommended type oil as listed in Table 4. Engine oil capacity is .48 quarts (0.45 liters). DO NOT overfill.

4.Install drain bolt with sealing washer and tighten securly.

DANGER :

DO NOT use gasoline as a cleaning solvent, because that would create a risk of fire or explosion.

ENGINE AIR CLEANER

1.Remove the air cleaner cover and foam filter element as shown in Figure 34.

2.Clean foam element in warm, soapy water or nonflammable solvent. Rinse and dry thoroughly. Dip the element in clean engineoilandcompletelysqueezeouttheexcessoilfromthe element before installing.

Figure 34. Engine Air Cleaner

Figure 33. Engine Oil (Draining)

STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 27

Page 26 Page 28
Page 27
Image 27
Stow SMC3PB, SMC3PE operation manual Stow Porto MIXER- Maintenance Gasoline Engine
Page 26 Page 28

SMC3PE, SMC3PB specifications

The Stow SMC3PB and SMC3PE are cutting-edge automated storage and retrieval systems designed to optimize warehouse operations and enhance logistic efficiency. Both models belong to Stow's advanced range of modular solutions that cater to the needs of modern storage facilities.

One of the standout features of the Stow SMC3PB and SMC3PE is their impressive load capacity. The SMC3PB model is particularly well-suited for heavy-duty applications, capable of handling loads of up to 1,200 kg, while the SMC3PE excels in medium-duty tasks with a load capacity of 600 kg. This versatility makes them ideal for various industries, including automotive, electronics, and consumer goods.

In terms of technology, both models are equipped with state-of-the-art control systems that ensure seamless operation. Users can monitor and manage the systems through intuitive interfaces, allowing for easy adjustments and real-time tracking of inventory. This level of control enhances overall warehouse management, streamlining workflows and reducing errors.

The design of the Stow SMC3PB and SMC3PE also highlights user safety and accessibility. Equipped with emergency stop buttons and safety sensors, these systems prioritize the well-being of operators while maintaining efficiency. Furthermore, their modular structure allows for easy expansion, meaning businesses can grow alongside their storage needs without the need for extensive renovations.

Another key characteristic is energy efficiency. Both models utilize advanced drive technology that minimizes energy consumption during operation. This not only reduces operational costs but also supports sustainable practices, contributing to a greener future for logistics and warehousing.

The Stow SMC3PB and SMC3PE are also renowned for their reliability. Built with high-quality materials and robust construction, these systems are designed to withstand demanding environments while maintaining peak performance. The durability of these systems ensures long-term investment value for companies looking to enhance their warehousing operations.

In conclusion, the Stow SMC3PB and SMC3PE are exceptional automated storage solutions that combine strength, technology, and efficiency. Their robust features, along with user-friendly controls and energy-efficient designs, make them valuable assets for any modern storage facility seeking to optimize operations and improve inventory management. With these systems, businesses can expect elevated performance and significant returns on investment.
Top Page Image Contents