SATA300 TX4302 Quick Start Guide
6
Or, attach individual LED cables as indicated in the diagram below.
6. If you have a Promise SuperSwap enclosure in your system, attach the
SMBus cable to the SMBus connectors on the SATA300 TX4302 card and
the SuperSwap enclosure.
This action is described in Chapter 2 of the SuperSwap User Manual.
7. Replace the cover of your system.
Step 4: Install Drivers
Drivers for the Windows operating systems are included on the CD that came
with your SATA300 TX4302 Controller card. Please download the latest drivers
from the Promise website at www.promise.com/support.
Windows systems usually recognize the SATA300 TX4302 Controller, prompt
you for the CD or diskette and perform the driver installation automatically.
If you are installing the SATA300 TX4302 Controller at the same time as your
operating system or you prefer to read step-by-step directions, see Chapter 3 of
the SATA300 TX4302 User Manual on the software CD.
LED1
LED2
LED3
LED4
– +
LED pinouts for
SATA300 TX4302
+ – – +
All LEDs