Sub-Zero CT15I/S Integrated Induction Cooktop, Planning Information, M O D E L C T 1 5 I / S

Models: CT15I/S

1 6
Download 6 pages 51.99 Kb
Page 5
Image 5
I N S T A L L A T I O N N O T E S

Planning Information

Integrated Induction Cooktop

M O D E L C T 1 5 I / S

I N S T A L L A T I O N N O T E S

This cooktop is intended for indoor use only. Refer to the illustrations and specifications for overall dimensions, cut-out dimensions and installation specifics.

Manual background Wolf recommends using 33" (838) wide cabinets for installation of two 15" (381) modules side by side. An 18" (457) wide cabinet is recommended for installation of a single 15" (381) cooktop or module.

IMPORTANT NOTE: Review specific installation instructions for product to product capabilities

Manual background If the 15" (381) integrated induction cooktop is to be used with any combination of addi- tional cooktop units or modules with a filler strip, the cut-out width increases to 14" (356). When multiple cooktops or modules are installed side by side, refer to the countertop cut-out dimensions on page 6.

IMPORTANT NOTE: A minimum height clearance of 6" (152) is required. If a shelf is installed below the unit, a 1" (25) gap at the rear of the cabinet shelf is necessary to allow for proper ventilation. Failure to do so could result in decreased performance or product damage.

Dimensions in parentheses are in

Manual background A Wolf downdraft system, Cooktop or Pro ventilation hood is recommended. When installing a ventilation hood, refer to the specific requirements of the hood for the minimum dimension to countertop. Also refer to Ventila- tion Recommendations in the Cooktop Ventila- tion or Pro Ventilation sections of our website, wolfappliance.com.

Manual background The Wolf 15" (381) integrated induction cooktop requires a separate, grounded 3-wire 240/208 V AC, 60 Hz, 20 amp service with its own circuit breaker. It has a 4' (1.2 m) flexible 3-wire conduit for connection at the electrical supply. Locate electrical within the shaded area shown in the Installation illustration on page 4.

Manual background You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service.

Manual background Refer to the installation instructions shipped with each Wolf product for detailed specifications.

This cooktop is intended for indoor use only.

millimeters unless otherwise specified.

5

Page 5
Image 5
Sub-Zero CT15I/S dimensions Integrated Induction Cooktop, Planning Information, M O D E L C T 1 5 I / S