Sub-Zero IC-30R, IC-18F manual Electrical, Plumbing

INTEGRATED REFRIGERATION

Electrical

The electrical supply must be located within the shaded area shown in the illustration and chart below. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

The electrical outlet must be positioned with the grounding prong to the right of the thinner blades.

Installation must comply with all applicable electrical codes.

ELECTRICAL REQUIREMENTS
Electrical Supply	115 VAC, 60 Hz
Service	15 amp
Receptacle	3-prong grounding-type
ELECTRICAL SUPPLY LOCATION
MODEL	A
18" Model	6" (152)
24" Model	91/2" (241)
27" Model	11" (279)
30" Model	121/2" (318)
36" Model	151/2" (394)

	LEFT SIDE
OF OPENING
41/2"	A
(114)
	41/4"
	(108)
1/4" (6)	FLOOR

Electrical supply location.

Plumbing

The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves. The water supply line must not interfere with installation of the anti-tip bracket.

A reverse osmosis system can be used provided there is constant water pressure of 35–120 psi (2.4–8.3 bar) supplied to the unit at all times. A copper line is not recommended for this application.

Installation must comply with all applicable plumbing codes.

PLUMBING REQUIREMENTS

Water Supply1/4" OD copper, braided stainless steel or PEX tubing

Pressure	35–120 psi (2.4–8.3 bar)
Excess Line for Connection	36" (914)
WATER SUPPLY LOCATION
MODEL	A
18" Model	3" (76)
24" Model	51/2" (140)
30" Model	6" (152)
36" Model	9" (229)

RIGHT SIDE
OF OPENING
A	6" (152)
3" (76)
AREA EXTENDS 1/2" (13)
FORWARD ON FLOOR

Water supply location.

subzero.com/specs 7