S U B - Z E RO WINE STORAGE U S E & C A R E
L E D D I S P L AY
Electronic control system functions, such as digital temperatures and service indicators, are shown in the LED display, located on the control panel. The temperatures of each zone will be visible through the glass door of your Wine Storage unit. If you are using your unit frequently, the numbers may fluctuate.
U N I T O N / O F F
The UNIT ON/OFF key pad on the control panel will shut off all electrical power to the Wine Storage unit for cleaning or service.
L I G H T S O N / O F F
All Wine Storage units have the capability of having the lights on independently of the door’s opening and closing. This will allow you to display your collection of wine for special occasions.
To have the lights remain on independently of the door’s opening and closing, press the LIGHTS ON/OFF key pad. Press the key pad again to have the lights to go off when the door is closed.
You should not leave the lights on overnight or for extremely long periods of time. The heat from the lights will cause the unit to work unnecessarily hard.
A L A R M F E AT U R E
If the microprocessor detects temperature fluctuations or a faulty component, you will hear an audible beep and a bell symbol will flash in the LED display on the control panel. Also, if the unit is tied in with your home security, it will alert this system. You can deactivate the alarm feature and the audible sound by depressing the BELL symbol key pad. If the alarm is deactivated, the bell will not be visible in the LED display.
S A B B AT H M O D E ( S TA R - K )
All Wine Storage units feature the Sabbath Mode. This is for certain religious observances where the lights need to be turned off.
To initiate Sabbath Mode, while the unit is on press the UNIT ON/OFF key pad so that OFF is visible in the LED display on the control panel. Your unit will be off.
Then press and hold the UNIT ON/OFF key pad for 10 seconds. This will turn the unit back on and will disable the lights. To return the unit to normal lighting, press and release the UNIT ON/OFF key pad.
If you have questions about
V I S U A L S E RV I C E D I S P L AY
The electronic control system monitors temperatures as well as the the unit’s opera- tion. If there is a temperature or operation problem, you will notice the word SERVICE illuminated in the LED display on the control panel. Before calling for service, please check to see if your condenser area needs cleaning. Refer to Condenser Cleaning on page 16.
9
