CLEANING AND ADJUSTING SPARK PLUG
(a)If the plug is contaminated with carbon, remove it using a plug cleaner or wire brush.
(b)Adjust the electrode gap to 0.6 to 0.7 mm (0.024 to 0.028 in.).
Spark plug :
Gap 0.6 to 0.7 mm |
(0.024 to 0.028 in.) |
CLEANING FUEL STRAINER
Dirt and water in the fuel are removed by the fuel strainer.
(a)Remove the strainer cup and throw away water and dirt.
(b)Clean the screen and strainer cup with gasoline.
(c)Tightly fasten the cup to main body, making sure to avoid fuel leak.
