AIR Cleaner Maintenance

10 DO NOT FILL TO A LEVEL ABOVE THE FULL MARK ON THE DIPSTICK. Drain the excess oil if too much has been added.

!CAUTION Too much oil can cause high oil consumption, high operating temperatures and oil foaming. Too little oil can cause severe engine damage. Keep the oil level between the Full and Add marks on the dipstick.

11Reconnect the spark plug wires and battery.

12Start the engine and run it for a short time while checking for oil leaks around the drain plug and oil ﬁlter. Do not overtighten: tighten only as necessary to eliminate leaks.

Used oil is harmful to the environment. Pour the used oil into a sealed container and deliver it to the nearest recycling center.

Refer to the Maintenance Table for the air cleaner assembly.

Outer Cover

To remove the air cleaner cover, rotate the wing nut counterclockwise and remove.

Foam Filter

Remove and wash the urethane foam in water and detergent. Squeeze the foam wrapper dry like a sponge. Rinse with clean water and allow it to dry. Coat the wrapper evenly with 14 mL (one tbsp.) of SAE 30 engine oil. Knead the oil into the wrapper and squeeze out the excess oil.

Note: Failure to adequately wring out excess oil from the wrapper may cause a drop in engine power due to restriction of inlet air.

Install the foam wrapper over the paper air cleaner element by stretch- ing it over the inner cover. Completely cover all exposed paper pleats. Replace the air cleaner assembly when it becomes torn or stretched.

Air Cleaner Element Replacement

To keep anything from entering the carburetor and engine while the air cleaner element is off, pull the choke knob to the full-choke posi- tion to close the choke plate in the carburetor. Remove the outer cover and wipe away loose dust and debris from the air cleaner assembly. Remove the air cleaner assembly. Wipe off dust and debris from the air cleaner base. Use forced air to blow off dust and debris from the paper element.

Reinstall the paper element on the engine. Replace the foam wrapper and outer cover. Secure with the wing nut.

Element Set

P/N 263-32610-A1

EH65 specifications

The Subaru Robin Power Products EH65 is a lightweight and versatile engine designed for a variety of applications, making it a preferred choice among professionals and DIY enthusiasts alike. Known for its reliability and efficiency, the EH65 is particularly suited for equipment like generators, pumps, pressure washers, and various handheld tools.

One of the main features of the EH65 is its air-cooled four-stroke engine that delivers robust power output while maintaining fuel efficiency. The engine typically produces around 6.5 horsepower, making it ideal for both light- and medium-duty applications. This engine is designed with a displacement of approximately 196cc, providing ample torque for demanding tasks. The design ensures smooth operation and minimal vibration, contributing to the overall ease of use.

In terms of technology, the EH65 utilizes Subaru's advanced overhead camshaft (OHC) design, which allows for improved airflow and combustion efficiency. This technology not only enhances power delivery but also reduces emissions, making the engine more environmentally friendly. The dual-ball bearing support system ensures longevity and reliability, as it minimizes wear and tear during operation.

Another standout characteristic of the EH65 is its simplicity of maintenance. The engine features an easy-access design, allowing users to perform routine checks and oil changes with minimal effort. This accessibility is a significant advantage for users who rely on consistent performance and uptime for their projects.

Moreover, the EH65 is designed with a lightweight aesthetic, boasting a compact size that makes it easy to transport and integrate into various equipment setups. Its low profile also allows for an easy fit in equipment where space is a constraint.

Durability is another key attribute of the Subaru Robin EH65. Built with high-quality materials, the engine can withstand challenging outdoor conditions, ensuring reliable performance day in and day out. Its robust construction signifies that it can handle the rigors of commercial use while also being suitable for residential applications.

In summary, the Subaru Robin Power Products EH65 stands out due to its efficient performance, lightweight design, and easy maintenance. With its advanced technology and durable construction, the EH65 is an excellent choice for users seeking a reliable engine that meets a wide array of power needs. Whether you are operating a generator, pumping water, or using pressure washing equipment, the EH65 delivers the quality and performance that Subaru Robin Power Products is known for.

Subaru Robin Power Products EH65 manual AIR Cleaner Maintenance, Outer Cover, Foam Filter

Models: EH65