■nca(1)
■snca(1)
■nca.if(4)
■ncakmod.conf(4)
■ncalogd.conf(4)

▼ToEnable SNCA to WorkWith Web Server

Thisprocedure assumes that SNCA has been congured, as discussed above.
Fromthe CommonTasks page, choose a conguration and click Edit Conguration.
Clickthe HTTP Listeners tab and select the HTTP listener to edit.
Onthe Edit HTTP Listener page, set the Protocol Familyto nca.
TheHTTP listener must be listening on port 80 for this to work.
Saveyour changes.
Clickthe Performance tab.
Clickthe Cache sub tab.
Onthe Cache Settings page, make sure the le cache is enabled and enable Use Sendle.
Saveyour changes.
Redeploythe conguration for your changes totake eec t.
MaximumThreads and Queue Size
Whenconguring Web Server to be used with SNCA, disabling the thread pool provides better
performance.These settings are on the conguration's Performance tab ⇒HTTP sub tab,
underThread Pool Settings. To disable the thread pool, deselect the Thread Pool Enabled
checkbox.You can also disable the thread pool using the wadm set-thread-pool-prop
command'senabled property.
Thethread pool can also be disabled with non-SNCA congurations, especially for cases in
whichshort latency responses with no keep-alives must be delivered.
1
2
3
4
5
6
7
8
9
SolarisPlatform-SpecicIssues
SunJavaSystem Web Server 7.0 Update 1 Performance Tuning,Sizing, and Scaling Guide •92