Ironing ironing
Dry Ironing
1.Make sure that the Steam Dial is set to ZERO.
2.Plug the cord into a 120 volt AC outlet. The Power Indicator will light.
3. Turn the Fabric Select Dial to the dry ironing fabric setting you desire and allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.
Tip: Refer to the Ironing Guide on Page 15 for the recommended setting for your fabric.
Steam Ironing
1.Follow the instructions for “Filling the Water Reservoir” on Page 5.
2.Plug the cord into a 120 volt AC outlet.
The Power Indicator will light.
3. Turn the Fabric Select Dial to the steam ironing fabric setting you desire (Linen, Cotton, Wool
or Silk) and allow the iron to heat for 2 minutes. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface.
Tip: Refer to the Ironing Guide on Page 15 for the recommended setting for your fabric.
4.After the iron has heated (2 minutes), turn the Steam Dial to desired steam setting.
6
