Instructions for Rice Cooker
1.Make sure appliance is unplugged.
2.Measure raw rice for desired amount with the measuring cup provided,
180 ml. (one cup of the uncooked rice will make about three cups of cooked rice). Add rice to inner pot and plug in appliance.
3.You may choose any of the following ways to add water for cooking:
a)By measuring cup, add proper amount of water to the rice inside the inner pot (for every cup of raw rice, add one to one and a half cups of water).
b)By waterline, add water to the rice inside the pot up to the proper waterline (for 3 cups of uncooked rice, add water to line 3).
4.Set the inner pot into the cooker. Make sure that the inner pot sits directly in contact with the heating plate by turning it slightly from right to left until it is seated properly.
5.Cover with lid. DO NOT OPERATE THIS APPLIANCE UNCOVERED.
STEAM IS GENERATED DURING USE.
6.Plug the cord into a 120V AC electrical outlet. Switch the Rice Cooker on. Make sure the power light is on.
7.Mix the rice. After 15 minutes of steaming, carefully open the lid, taking care to avoid steam. Use the ladle or other long handled utensil to scoop and mix the rice. After mixing, cover inner pot with lid.
8.When your rice is cooked, the cooker will automatically switch to the warm function.
9.Allow the appliance to cool completely before cleaning.
10.Disconnect the plug from the wall outlet when not in use.
Notes
1.Wash the measured rice in separate bowl, if desired.
2.For softer rice, we suggest preparing rice and water in the inner pot and letting soak for
Instructions to Reheat Rice
1.To reheat cold rice, add 1/4 cup (4 tbsp.) of cold water per cup of cooked rice, stir to mix, then press switch to cook.
2.When rice is warmed, the cooker will automatically switch to the warm function.
5
