Care and Cleaning
Turn the power off and unplug the cord from the power outlet before cleaning. The Cutting Assembly is easily removed for thorough cleaning. (See figure 5.)
Release Button |
Keyhole |
Drive Wheel |
Figure 5 |
Removing the Cutting Assembly:
Raise the Cutting Assembly to its most upright position. Slide the Release Button to the right and slide out the Cutting Assembly. To replace the Lever hold it vertically with the Release Button slid to the right, gently slide it into the Keyhole and rotate clockwise. (See figure 5.)
Drive Wheel:
Wipe with a damp cloth to thoroughly clean, use a small brush to remove accumulated dirt.
Motor Housing:
Wipe over with a damp cloth.
Do not use harsh abrasives or cleaners to clean any parts of your Open All™ can opener, as these may scratch the parts.
Do not wash any parts in an automatic dishwasher, as the hot water temperatures and harsh detergents may ultimately warp and scratch these parts.
Warning: NEVER IMMERSE THE OPEN ALL IN WATER OR ANY OTHER LIQUID.
6
