Sunbeam DFF258BLSSB Troubleshooting, Problem, Possible Cause, Solution, Unit does not work

TROUBLESHOOTING

Occasionally, a problem may arise that is minor in nature, and a service call may not be necessary. Use this troubleshooting guide for a possible solution.If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number for assistance.

PROBLEM

POSSIBLE CAUSE

SOLUTION

1) Unit does not work.	• No power to unit.	• Check connection of power
		cord at power source.
	• Power cord is unplugged.	• Plug in unit.
	• Wrong voltage is being used.	• Use proper voltage.
2) Refrigerator running	• Temperature control too high.	• Check/adjust settings as needed.
too frequently.	• Door not closed.	• Close the door securely.
	• Hot food inserted.	• Cool food before inserting.
	• Doors open too long/often.	• Minimize door openings/duration.
	• Close proximity to heat	• DO NOT place unit close to heat
	source or direct sunlight.	sources or in direct sunlight.
3) Internal Temperature	• Temperature control too high.	• Check/adjust settings as needed.
too cold.
4) Internal Temperature	• No power to unit.	• Check connection of power
not cold enough.		cord at power source.
	• Power cord is unplugged.	• Plug in unit.
	• Wrong voltage is being used.	• Use proper voltage.
	• Temperature control too low.	• Check/adjust settings as needed.
	• Hot food inserted.	• Cool food before inserting.
	• Doors open too long/often.	• Minimize door openings/duration.
	• Air flow obstruction.	• Allow room for air to circulate
		around the unit.
	• Close proximity to heat	• DO NOT place unit close to heat
	source or direct sunlight.	sources or in direct sunlight.
5) Freezer not cold	• Temperature control too low.	• Check/adjust settings as needed.
enough.	• Door not closed.	• Close door securely.
	• Hot food inserted.	• Cool food before insterting.
	• Doors open too long/often.	• Minimize door openings/duration.
	• Wrong voltage is being used.	• Use proper voltage.
6) Light will not work.	• No power to unit.	• Check connection of power cord
		to power source.
	• Power cord is unplugged.	• Plug in unit.
	• Bulb is loose/needs replacing.	• Tighten or replace bulb.
	• Door switch is stuck.	• Check the switch for obstructions,
		clean if necessary.

5