Using your Sunbeam AutoGrinder
Before using your Sunbeam AutoGrinder, wipe the stainless steel grinding bowl and blades clean with a damp cloth and wash the transparent cover in warm soapy water. Dry thoroughly.
Note: Allow to dry completely before using.
1.Place the AutoGrinder on a dry, level surface.
2.Remove the cover of the AutoGrinder by turning it to the right/unlock position, then lift straight up.
5.Hold the plug and pull slowly to release the stored cord. Plug the power cord into a
6.Select the style of coffee (Percolator, Auto Drip, Espresso) and slide the grind selector to the quantity of ground coffee desired.
4
COARSE/8
PERCOLATOR 12 15
| 4 | |||
MEDIUM/ |
|
|
| 8 |
DRIP | 12 | |||
| 15 | |||
4
FINE/8
ESPRESSO12 15
= =
3.Using the measurements on the cover/lid, fill with the desired amount of coffee beans and pour into the grinding bowl. Alternatively scoop the beans directly into grinding bowl.
4.Replace and lock the cover onto the AutoGrinder. Align the arrow on the lid/cover with the ‘unlock’ graphic, on the rear of the grinder, and turn the cover to the left/lock position.
7.Press the ‘Power’ button to commence grinding and then remove finger. The Sunbeam AutoGrinder will stop automatically when the selected grind is achieved. To stop the grind cycle at anytime, push the ‘Power’ button. When the ‘Power’ button is pressed again, the grinder will start from the beginning of the timed cycle.
Important: Do not remove the cover before the blades have stopped moving.
8.Once the blades have stopped rotating unplug the cord from the power outlet and remove the cover. Gently tap the base of the AutoGrinder to loosen the freshly ground coffee from the stainless steel grinding bowl.
Note: The AutoGrinder will only operate when the cover is in the locked position.
= =
5
