Using your Sunbeam Burr Grinder
Before using your Sunbeam Burr Grinder, wipe the base exterior, grinding bowl and
Note: Do not immerse the upper burr grinding wheel in water or any other liquid.
Note: Do not place any parts of the Sunbeam Burr Grinder in the dishwasher.
For first-time grinding
Important: During manufacturing, the upper burr grinding wheel is positioned so that it is very close to the lower burr grinding disk. To ensure the grinder performs properly, proceed as follows:
1.Place the Sunbeam Burr Grinder on a dry, level surface.
2.Check to make sure that the grinding bowl is free of any foreign objects and that it is completely clean and dry.
3.Set the grind fineness selector to number ‘9’.
4.Fill the grinding bowl with 3 to 4 scoops of coffee beans and position the grinding bowl lid to the bowl.
5.Plug the power cord into a
6.Turn the power switch on the Sunbeam Burr Grinder to ‘ON’, the switch will illuminate.
Note: Ensure that the lid on the grinding bowl is secure and in place.
7.Push the ‘GRIND’ button for 2 seconds and release. The Sunbeam Burr Grinder will grind all the beans in the grinding bowl, once empty it will then stop automatically.
8.Turn the power switch on the Sunbeam Burr Grinder to ‘OFF’.
9.Remove the lid to the grinding bowl and fill bowl with 3 to 4 scoops of coffee beans. Replace the lid.
10.Set the grind fineness selector to number ‘4’, this is to ensure that the upper burr grinding wheel is moving properly.
11.Turn the power switch on the Sunbeam Burr Grinder to ‘ON’.
12.Push the ‘GRIND’ button for 2 seconds and release.
Note: Your Sunbeam Burr Grinder is now prepared to be used on a regular basis.
Grinding
1.Place the Sunbeam Burr Grinder on a dry, level surface.
2.Check to make sure that the grinding bowl is free of any foreign objects and that it is completely clean and dry.
4
