Using the control panel
Power
Press the ‘POWER’ button once to turn the espresso machine on. The light located on the 
power button will illuminate red and the temperature indicator line on the LCD will start to flash from 
symbol; this is to indicate that your espresso machine is on and is heating up.
Note: Before turning on the espresso machine ensure that the operating dial on the side of the espresso machine is in the off position.
Depending on the function selected, the temperature line on the LCD will track around to either the 
espresso or 
steam temperature setting. When the espresso machine is heated and ready to use 'READY' will appear on the LCD.
Note: Remember that if 'READY' is not displayed on the LCD the espresso machine is adjusting the temperature of the heating system.
To turn the espresso machine off, simply press the 
power button.
Clock
Note: The clock will automatically begin keeping time if the correct time is not set. The correct time does not need to be set to operate the espresso machine. To set the clock simply press the 'H' button to select the hour, ensuring that AM/PM appears correctly and 'M' button to select the minutes.
Note: Holding down either the 'H' or 'M' buttons will allow for rapid time change.
Espresso/Hot water
When the espresso machine is switched on and the espresso machine is in espresso/hot water mode, the red light on 
power button and the orange light on the 
button will be illuminated.
Note: Should the espresso machine not be in espresso/hot water mode, so the orange light on 
button is not on, the coffee maker needs to press the button to activate the espresso/hot water mode. By design the temperature of the espresso machine will adjust as necessary.
7
