Using Your Tower Fan (continued)
Nature mode
Nature mode provides an extra level of comfort by simulating the natural rise and fall of the wind over time. You can use this mode on any fan speed setting.
To use Nature mode: 1.Choose a fan speed.
2.Press the 
button on either the tower or
the remote until the light illuminates.
The fan will now vary its speed every few seconds between the chosen fan speed, each lower fan speed, and off. For example, if you set the fan speed to 2 (medium), the actual fan speed will alternate between 2, 1 and off.
To cancel Nature mode, Press the | button |
on either the tower or the remote until the 
light is no longer illuminated.
Sleep mode
Sleep mode is identical to Nature mode with the added advantage that the highest fan speed gradually decreases over time. This allows you to turn the fan on a high speed setting last thing at night, knowing that by the time you are asleep, the fan has switched itself down to a slower speed.
To use Sleep mode: 1.Choose a fan speed.
2.Press the 
button on either the tower or the remote until the 
light illuminates.
The fan will now operate in the same manner as with Nature mode, except that after 30 minutes, the maximum speed will decrease. Eventually in this mode, the fan switches down to 1 (low) speed, which alternates between 1 and off.
To cancel Sleep mode, Press the 
button on either the tower or the remote until the 
light is no longer illuminated.
11
