Using your Sunbeam Café Series™ Food Slicer
1.Ensure that all parts of the food slicer are correctly in place. Place the fully assembled appliance on a flat level surface with the width selection dial to your left. See Figure 2.
Note: If the length of the food to be sliced is longer than the sliding guide, connect the extension tray to the sliding food guide, using the 2 hole cutouts on the sliding guide to align and connect the extension tray. See Figure 4.
UN
Figure 2 | Figure 4 |
2.Apply downward pressure onto the slicer, ensuring it is pressed firmly to the bench to activate the suction cup feet.
3.Pull the sliding food guide towards you, as far as it will slide. Place the food to be sliced on the sliding food guide with the safety food holder in place, so that it rests against the width panel. See Figure 3. Do not rest food against the blade. Ensure that the safety food holder holds the food firmly in place.
4.Remove the food collection tray from underneath the unit and place it on the left hand side of the food slicer to collect the slices. See Figure 5.
Figure 5
Figure 3
7
