Using Your Heater
Switching the heater on
1.Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions.
2.Insert the plug into a 230/240V power outlet and turn the power on.
3.Turn the thermostat dial to the highest setting by rotating the dial clockwise as far as it will turn.
4.Turn the mode selector dial to the desired heat setting, I or II.
Using the fan without heat
•To use the fan without heat, set the thermo- stat dial to the lowest setting and select the fan setting 
on the mode selector dial.
Setting the thermostat
1.Set the thermostat to the highest setting by turning the dial clockwise as far as it will turn.
2.When the room has reached the desired temperature level, lower the thermostat setting by turning the thermostat dial anticlockwise until it clicks. The heater will stop operating.
3.The thermostat is now set and will maintain the
6
