Sunbeam HE4100 manual Troubleshooting Guide, Care and Cleaning

Models: HE4100

1 12
Download 12 pages 50.7 Kb
Page 10
Image 10

Troubleshooting Guide

1.If your heater fails to operate, check the following:

-Make sure the electrical outlet or circuit breaker is working..

-Check for obstructions, if obstructions are present, the heater may have gone over temperature. If this is the case turn off the heater at the power outlet, remove the obstructions and wait for the heater to cool before turning the heater back on.

-Check that the thermostat is not set too low.

Turn the dial clockwise to adjust the electric thermostat. Until the heater restarts.

Care and Cleaning

Ensure that the heater is switched off and disconnected from the power outlet before cleaning.

Carefully wipe the exterior of the heater with a soft damp cloth and dry thoroughly with a dry cloth.

Over time, dust may accumulate on the front grille. This can be removed by wiping with a damp cloth, or by carefully going across the grille with a vacuum cleaner or hand held vacuum.

Do not use harsh or abrasive cleaners to clean your heater, as these will damage the surface.

When not in use store the heater in a cool dry place.

8

Page 10
Image 10
Sunbeam HE4100 manual Troubleshooting Guide, Care and Cleaning