Clean Your Automatic Hot Tea Maker Before Using the First Time!
Wash ceramic tea pot and lid in mild detergent and water. Rinse each thoroughfy. Follow steps 4 through 6 below (with water only) to clean the inside of your automatic hot tea maker.
Steeping Tea
1.Swing cut the brew basket to the rlght, and insert a 4 CUP basket style, Mr. Coffee’ brand paper filter (JR100 or JR100NB) into the inner brew basket. You may also use a Mr. Cdfee@ Gcup permanent filter model number GTFJR.
2.Add desired amount of tea according to the tea measurement chart found cn page 6. We recommend between
3.Be sure the filter is properly centered before closing the browbasket into place. Close the brew basket by swinging the brew basket to the left. Please make sure the brew basket is locked into place.
4.Remove the ceramic tea pot from the warming plate.
5.Fill the ceramic tea pot with enough tap w to make desired amount of tea. For a full pot, fill tap !&&r to about 1’ below the rim u m Do no4 exceed15 ounces.
Only fill the reservoir with water. Do not reheat any liquids in this machine.
6.Remove the ceramic tea pot lid from the water reservoir. Pour the water into the water reservoir. Do not overfill your water reservolr. In the opening of the reservoir you will find a knob and a series of spokes. This design prevents the water from splash- ing when it IS poured into the unit. Then rinse the ceramic tea pot with hot water and dry. Place the empty ceramic tea pot onto the warmer plate. Return the ceramic tea pot lid to the recessed area found on top of the water reservoir.
7.Adjust steeping lever. The farther the lever is set to the right the longer the steeping time and the stronger the tea. The lever will allow you to adjust the brew cycle time from 6 to 6 minutes for a 15 ounce pot of tea. You may want the steeping lever set to the right when steeping herbal teas.
