How to use your Sunbeam Citrus Juicer
Before use
Before using your Sunbeam citrus juicer for the first time, apart from the motor base, wash all parts in warm soapy water. Rinse and dry thoroughly.
1.Place the citrus juicer jug onto the motor base.
2.Select the cone size desired, depending on the size of fruit you are going to juice.
3.Cut citrus fruit in half, cutting across segments.
4.Plug the power cord of the citrus juicer into a
5.Press fruit down onto the cone and the juicing action will start automatically.
6.Lift the fruit off the cone and juicing action will stop automatically.
Juicing Tips
•Fruit juiced at room temperature will yield more juice.
•Roll fruit between palm of your hand and the bench top before cutting, to loosen fibres.
•Push fruit from side to side against cone while juicing to extract all the juice.
Care and Cleaning
Unplug and remove all parts from the motor base before cleaning.
Motor Base
Wipe with a damp cloth. Never immerse in water or other liquids. Never use harsh abrasives or detergents.
Jug, Pulp Basket, Cover and Juicing Cones
Wash in warm to hot water using a mild detergent.
Note: Do not wash any parts of the citrus juicer in a dishwasher. The hot water temperature and harsh detergents may ultimately warp or scratch these parts.
Storage
Sunbeam suggests your citrus juicer be kept on a dry bench top in your kitchen, where it will always be ready for use. The cover will keep your citrus juicer free from dust.
3
