Using your Sunbeam CitrusPress
Before using your CitrusPress
Clean the juicing cones, stainless steel sieve and juice container in warm soapy water. Rinse and dry thoroughly. Alternatively you can place these parts in the upper section of your dishwasher.
Using your CitrusPress
1.Position the stainless steel sieve onto the juicing container and place onto the motor base.
2.Place the small juicing cone onto the drive shaft. If you are juicing larger citrus fruits, position the larger juicing cone over the smaller juicing cone so the large cone is sitting on top of the smaller cone.
3.Plug the power cord of the CitrusPress into a
4.Place a glass under the
5.To open the
6.Cut the citrus segments in half, cutting across the segments.
Note: Before juicing we recommend that you roll the fruit on the bench whilst pressing down gently. This way you will obtain more juice.
7.Press a fruit half onto the juicing cone – the CitrusPress starts automatically and stops when the fruit is removed.
8.Push the
9.When the CitrusPress is no longer needed, remove the power cord from the power outlet and clean the CitrusPress – see
“Care and Cleaning” below.
Care and Cleaning
Note: Before cleaning always remove the power cord from the power outlet.
Remove the juicing cones, stainless steel sieve and juicing container from the motor part of the base of the CitrusPress.
Clean all parts with warm soapy water. Rinse and dry thoroughly.
Note: For thorough cleaning of the
Alternatively you can place these parts in the upper section of your dishwasher.
Clean the motor base of the CitrusPress with a damp cloth. Never use harsh cleaning or scouring agents. Never immerse in water or other liquids.
4