Care and Cleaning
Always remove the plug from the power outlet before cleaning.
Never immerse the kettle switch area, cord or powerbase in water, or allow moisture to come into contact with these parts.
Removal of mineral deposits.
Mineral deposits in tap water may cause the interior to discolour. To remove this build- up, use Sunbeam Liquid Descaler, a simple to use,
Alternatively:
1.Fill the kettle with 3 cups of white vinegar and the remainder with water and allow to stand overnight. DO NOT BOIL.
2.Empty the solution from the kettle. Any stains remaining inside the spout can be removed by rubbing with a damp cloth. Fill the kettle with clean water, bring to boil and then discard the water. Repeat and the kettle will then be ready to use.
The outside of the kettle can be wiped over with a damp cloth.
CAUTION: Do not use chemicals, steel wool, or abrasive cleaners to clean the outside of the kettle.
To clean the mesh filter
Grasp the top of the mesh filter and pull upwards to remove. Wash in warm soapy water and dry thoroughly before replacing in the kettle.
8
